Has anyone done Hueforge printing using a MK4?
Hi all,
I was watching a few videos on youtube and an interiew with Steve from hueforge and wanted to hear about if anyone has used it on the MK4? I have a free life time copy of the hueforge program and can be found here if anyone is interested https://shop.thehueforge.com/collections/hueforge but all the videos are showing prints from Bambu labs etc.
I know you can add a filament colour change in Prusa slicer but I wanted to see if anyone has done it and got a sample print they can show? I note that Printables has a few .stl you can download, which would mean that people have printed them out.
Does the MK4 with image shaper help with small movements and fast printing? I have seen that some prints take many hours to print out?
thanks in advance
RE: Has anyone done Hueforge printing using a MK4?
Leider geht der link nicht mehr Würde es auch gerne mal versuchen das Programm kann man da von ihnen bekommen
RE: Has anyone done Hueforge printing using a MK4?
I’ve done several Hueforge prints on a Mk4. Hueforge will tell you at behest level you need to change the filament so just use those values to add layer changes in Prusaslicer.
If you look at the makes associated with any of the Hueforge designs uploaded to Printables most people state the printer they used. Here’s an example of one I printed on the Mk4, https://www.printables.com/model/550359-star-wars-inspired-baby-yoda-jedi-training-hueforg/comments/1059746
RE: Has anyone done Hueforge printing using a MK4?
Hello,
I have made hueforge prints with the MK4, in fact if you look at my printables profile I have some models and I have included the gcode there as well in case they can be useful to you.
https://www.printables.com/es/@fernandotg81_761077/models