printer only recognises g-code that came preloaded on sd-card
 
Notifications
Clear all

printer only recognises g-code that came preloaded on sd-card  

  RSS
ben redfern
(@ben-redfern)
Active Member
printer only recognises g-code that came preloaded on sd-card

I am able to print the example files that came preloaded onto the usb. Now I have installed PrusaSlicer and imported my .STL/.3MF file that I made in Shapr3D and I can successfully sliced the model ad preview it without issues in the G-code viewer, but then I try to open it with the 3D printer, it doesn't show a preview like it does for the other gcode files, and when I press 'Print', it just sits there doing nothing for a few minutes then the print icon changes to Reprint. 

I've double checked the printer settings and they are identical to the examples. If anyone has any ideas what is the problem here I would really appreciate it

This topic was modified 1 year temu by ben redfern
Opublikowany : 02/10/2023 10:42 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: printer only recognises g-code that came preloaded on sd-card

try importing and slicing an STL that wasn't made in Shapr3d, see if that slices and prints ok.
the issue, may be with the shaper stl's
regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Opublikowany : 03/10/2023 2:55 am
FoxRun3D
(@foxrun3d)
Famed Member
RE:

Feel free to save the project from Prusaslicer as a 3mf file, zip compress it and attach it to a post here. That way we can check the STL as well as all your settings for issues. 

Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...

Opublikowany : 03/10/2023 2:25 pm
ben redfern
(@ben-redfern)
Active Member
Topic starter answered:
RE: printer only recognises g-code that came preloaded on sd-card

I have tried using an .stl from another software but it's the same issue

3d files

Opublikowany : 03/10/2023 6:38 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: printer only recognises g-code that came preloaded on sd-card

Have you tried printing the part 'Clip'  without all of the modifications to the prusa profile?

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Opublikowany : 03/10/2023 7:11 pm
ben redfern
(@ben-redfern)
Active Member
Topic starter answered:
RE: printer only recognises g-code that came preloaded on sd-card

what modifications are you referring to? I simply opened the stl and pressed Slice I didn't modify anything

Opublikowany : 03/10/2023 7:42 pm
FoxRun3D
(@foxrun3d)
Famed Member
RE: printer only recognises g-code that came preloaded on sd-card

I don't see anything obviously wrong with the model or the settings. Just trying to check off all the boxes: Are you running firmware 5.0.0 on the Mk4?

Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...

Opublikowany : 03/10/2023 8:47 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: printer only recognises g-code that came preloaded on sd-card

In Prusa slicer the right hand window shows there are modifications in each section

the three red ovals show the word modified!
then in Printer settings 

the RED Unlocked locks indicate where changes were made by someone

Again red unlocked lock indicates a change


again unlocked lock shows changes

If you click on the red lock, it should change to grey, and restore the normal defaults
slicing with a prusa default profile, should result in a reasonable print, once you have a reasonable print, you can consider making changes, if they are required. and see what happens. 
regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Opublikowany : 03/10/2023 8:57 pm
Tom De Winter polubić
ben redfern
(@ben-redfern)
Active Member
Topic starter answered:
RE: printer only recognises g-code that came preloaded on sd-card

Yes the firmware is the latest and I do not see those modifications when I use PrusaSlicer.

Opublikowany : 03/10/2023 10:31 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: printer only recognises g-code that came preloaded on sd-card

Hi Ben,
Have you got a print to print yet?   If not, 
Please try the attached Gcode    (Clip JT.Gcode)

Clip JT

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Opublikowany : 03/10/2023 11:01 pm
FoxRun3D
(@foxrun3d)
Famed Member
RE: printer only recognises g-code that came preloaded on sd-card

In Prusa slicer the right hand

Huh, I don't see any of those when I open the 3mf the OP uploaded with PS 2.6.1. 

Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...

Opublikowany : 03/10/2023 11:11 pm
ben redfern
(@ben-redfern)
Active Member
Topic starter answered:
RE: printer only recognises g-code that came preloaded on sd-card

I tried updating the firmware with a .bbf file from the USB drive but my printer says its an unsupported bbf file. That's not making any sense to me, it seems to be having an identity crisis.

Using Prusa Link over Ethernet connection I am able to get it to work, although its extremely slow to start working.

Opublikowany : 03/10/2023 11:49 pm
ben redfern
(@ben-redfern)
Active Member
Topic starter answered:
RE: printer only recognises g-code that came preloaded on sd-card

I think the issue is because I'm using a company PC. It's possible that it encrypts anything loaded onto the USB drive so third parties can't read anything back only devices on my company's network

Thank you for the help

Opublikowany : 04/10/2023 12:00 am
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: printer only recognises g-code that came preloaded on sd-card

 

Posted by: @fuchsr

In Prusa slicer the right hand

Huh, I don't see any of those when I open the 3mf the OP uploaded with PS 2.6.1. 

odd...
i reloaded the file several times...
each time same issues,    
I am also using PS2.6.1
regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Opublikowany : 04/10/2023 6:58 am
w huson
(@w-huson)
Eminent Member
RE: printer only recognises g-code that came preloaded on sd-card

Call me a simpleton, but.. Could it be because your sliced file has the suffix ".g" instead of normally ".gcode" ???

Opublikowany : 04/10/2023 11:49 am
Neophyl
(@neophyl)
Illustrious Member
RE: printer only recognises g-code that came preloaded on sd-card

Joan the profiles in the 3mf are just different from the versions you have on your computer. They are the same named profiles which is why yours mark the differences. I’ve seen it before when opening other 3mf files. 

Opublikowany : 04/10/2023 4:25 pm
Share: