Print quality issues
I'm having issues with the print quality on the MK4. I am using the built-in settings in the most up to date Prusa Slic3r and the quality is very poor compared to my MK3S+ printer. The surface finish is very rough, there are random bumps on the print. In the picture, the silver print is from my MK3S+ with the same infill, etc as the gold one on the MK4. I'm at a loss. I am also having bed adhesion issues, even with using Magigoo adhesive. I have 7 MK3S+ and assembled every one of them from a kit, never had issues like this 🙁 Any help would be appreciated. 
RE: Print quality issues
I'm having issues with the print quality on the MK4. I am using the built-in settings in the most up to date Prusa Slic3r and the quality is very poor compared to my MK3S+ printer. The surface finish is very rough, there are random bumps on the print. In the picture, the silver print is from my MK3S+ with the same infill, etc as the gold one on the MK4. I'm at a loss. I am also having bed adhesion issues, even with using Magigoo adhesive. I have 7 MK3S+ and assembled every one of them from a kit, never had issues like this 🙁 Any help would be appreciated.
could you upload 3mf file go prusaslicer save project then zip it up and upload here please
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models