Under extrusion issues
Hi there,
I think I'm having some problems with my prusa mini+. I just upgraged my extruder to a BondTech IFS ( https://www.bondtech.se/product/ifs-extruder-for-prusa-mini/) using these instructions ( https://support.bondtech.se/Guide/01.%20Feeder%20Upgrade%20Kit/59.html#s656) because I have been trying to debug some under extrusion and clicking issues for a couple of months now. I thought that this upgrade would fix some of the issues. I additionally conducted a service on my printer in that I lubricated the axis, cleaned up any dirt, replaced the extruder tube, heatbreak, heaterblock and nozzle and checked the cabeling. The clicking is definitely gone but as you can see I appear to still be having some extrusion issues. Some settings I've listed below:
Filament: Prusament
Firmware: 4.3.4
I've researched this topic pretty heavily now having read books and watched a bunch of tutorials. I'm fresh out of ideas and hence I'm hoping to turn to the community to see if someone can help a smooth brain like me 😛 I would be very appreciative if someone could help me out with this issue/s I've been having.
Cheers,
Andrew
P.S. Shout out if you have any questions or need any more details regarding the print configuration.