Tutorial or video available for variable layer height tool in P 2.3?
 
Benachrichtigungen
Alles löschen

Tutorial or video available for variable layer height tool in P 2.3?  

  RSS
Dan Rogers
(@dan-rogers)
Noble Member
Tutorial or video available for variable layer height tool in P 2.3?

I was reading an interesting post about optimizing a print down from 8ish hours to under 3 - and various settings were tweaked along the way, each yielding a different print time difference.  A great post with lots of details - just the kind of thing I like about this forum.  One setting I saw is called variable layer height.  The post didn't specify much other than an additional gain by setting variable layer height.  So I went fishing in the prusa slicer and found the button on the top tool bar.  Good so far.

Clicking it exposes a small window with a couple of named settings next to shaded bars.  The bars make it clear that left click does X and right click does Y.  But I could not figure out WHAT to click in order to go farther with variable layer height.  Since I'm sure it's documented in a how-to somewhere, could someone point me in the right direction?  My clicking around taught me that the shape I wanted, but clicking on the shape in the window didn't cause any noticeable action or change - so I figure there is something I need to learn.

Veröffentlicht : 01/02/2021 6:02 pm
Gordon W
(@gordon-w)
Reputable Member
RE: Tutorial or video available for variable layer height tool in P 2.3?

How about https://help.prusa3d.com/en/article/variable-layer-height-function_1750 ?

Veröffentlicht : 01/02/2021 8:56 pm
Dan Rogers gefällt das
bobstro
(@bobstro)
Illustrious Member
RE: Tutorial or video available for variable layer height tool in P 2.3?

Prusa has started a large-scale documentation effort, including the Variable Layer Height feature, but unfortunately, documentation always seems to lag behind the latest software releases. This isn't unusual, but it can take a while for good documentation to be available. I have a few notes here, but those are also a bit out of date. I'll try to incorporate the new information soon.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Veröffentlicht : 01/02/2021 9:42 pm
Dan Rogers
(@dan-rogers)
Noble Member
Themenstarter answered:
RE: Tutorial or video available for variable layer height tool in P 2.3?

@bobstro

Thanks Bobstro.  I sure do understand how hard it is to get documents out there.  The link gave me a starting point.  I'm gonna have to play with it to see what it does to some of my longer running prints.  

Veröffentlicht : 01/02/2021 10:04 pm
bobstro
(@bobstro)
Illustrious Member
RE: Tutorial or video available for variable layer height tool in P 2.3?

I've made some updates to my notes. Let me know if you spot any errors.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Veröffentlicht : 01/02/2021 11:02 pm
bapski gefällt das
Teilen: