Notifications
Clear all
Thin wall printing support in prusaslicer
It would be very nice if Prusaslicer supports thin wall printing for my 3d printed rc planes.
got the gcodes from 3dlabprint but planeprint only has stl files and still have to use Cura to slice the files.
i wish that Prusaslicer is going to support thin wall stl files.
Publié : 26/12/2020 9:46 pm
RE: Thin wall printing support in prusaslicer
The problem with most of those 'thin wall' rc plane files is that they aren't actually valid manifold stl files. They make use of tricks in the other slicers to make them come out. Use the slicer recommended by the designer of the files. Or get the designer to do proper valid ones that will work in Slicer.
Publié : 26/12/2020 10:00 pm