Notifications
Clear all
Stringing solution - post print
I have several very large prints (220mm x 145mm x 175mm) that have given me much 'angel hair' stringing. Post print manual cleaning was tedious, so I refrigerated the parts overnight and used a heat gun set on high. BAM! The angel hair popped and shrank immediate while the body remained cold! 😀
Publié : 24/10/2022 6:01 pm
Vous a aimé
RE: Stringing solution - post print
Yes, the heat gun. One of my favorite 3d printing tool 😀
But I've never put the parts in the fridge. Seems to work okay without that.
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...
Publié : 24/10/2022 8:54 pm