Notifiche
Cancella tutti
Squealing Y Axis
I just got my mini a little under a month ago and have printed about 100 hours on it.
Yesterday I heard a repeating squeal whenever the bed moved forward, so I cleaned the smooth rods with IPA then used the included lube and everything seemed to be fine again, for about four hours. I repeated the process, but this time the squealing didn't go away at all.
I also tightened the grub screws to no avail
Any advice?
Best Answer by Tracy:
See this thread but be careful about over correcting or you'll cause a layer shift.
Postato : 27/06/2020 6:53 am
RE: Squealing Y Axis
See this thread but be careful about over correcting or you'll cause a layer shift.
Postato : 27/06/2020 3:07 pm
RE: Squealing Y Axis
Hi,
my I3 MK3S squeaked for the first three days and then fell silent. Now that makes me nervous 🙂
Christoph
Postato : 27/06/2020 3:45 pm
Topic starter
answered:
RE: Squealing Y Axis
Yup, crooked belts was the problem
Thanks
Postato : 28/06/2020 5:58 am