Notifications
Clear all
Printing Vase in Spiral Vase mode. 0.4 MM vs 0.8 MM
I am trying to print primarily vases out of my i3 Mks +. Currently I am using a 0.4MM nozzle with 0.8 MM double side perimeter. I am wondering if I have a larger nozzle with a 1.6MM double sized wall if that will work.
The reason is I want thicker walls for Vases since the .8MM is still pretty flimsy.
Any information is appreciated.
Publié : 24/12/2022 4:29 pm