Notifications
Clear all

Printer Idenfication Help?  

  RSS
grubbmake
(@grubbmake)
New Member
Printer Idenfication Help?

Hey, all...if I am posting in the wrong place, please let me know.

I picked up this printer yesterday from Facebook Marketplace. I got it all plugged in and calibrated Z and it printed a few test prints pretty nicely.

I have attached some pictures, but obviously it has been modified quite a bit (linear rails on all axis, modified PSU, Raspberry Pi w/camera.) Can anyone tell me what I have here or what it may have started as?

The steel sheet shown in the pictures is from my MK3+

This is my second Prusa, I bought a new (kit) MK3S+ last summer and have really been enjoying it. I wanted a second machine so that I can print multiple things at once.

https://imgur.com/a/YBNs7ne/

 

Opublikowany : 21/05/2022 6:29 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Printer Idenfication Help?

That looks like a modified Mk3 or Mk3S, the silver powersupplies were supersceded with Black Delta Powersupplies  before the Mk3S+ came along

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Opublikowany : 22/05/2022 10:55 am
grubbmake
(@grubbmake)
New Member
Topic starter answered:
RE: Printer Idenfication Help?

Yeah…its looking like its most likely a heavily modified clone of a MK3   

Im basing it mainly on the stepper motors which are not similar to any i have seen on a genuine Prusa while researching  

Posted by: @joantabb

That looks like a modified Mk3 or Mk3S, the silver powersupplies were supersceded with Black Delta Powersupplies  before the Mk3S+ came along

regards Joan

 

Opublikowany : 22/05/2022 12:05 pm
Share: