Print fan (MK3S/+, MINI/+) new generation weaker
 
Notifications
Clear all

Print fan (MK3S/+, MINI/+) new generation weaker  

  RSS
Daniel
(@daniel)
Eminent Member
Print fan (MK3S/+, MINI/+) new generation weaker

Have recently bought 3 new fans for my Prusa MK3S and MINI, unfortunately had to realize that these do not approach the old Orginale Prusa fans. Have wondered why the new fans are suddenly too quiet, after some test was clear, less air flow and also less speed according to the display, the new have about 3600U/min at 100% fan speed and the old are at 4700U/min, I do not find OK from Prusa, then I could also take FYSETC fans, as these are just as weak or have less cooling capacity, especially with PLA.

Have you also had the experience?

Publié : 09/07/2021 7:22 pm
cwbullet
(@cwbullet)
Membre
RE: Print fan (MK3S/+, MINI/+) new generation weaker

How do I tell which fans I have?  I have used FYSETC and they worked for me.  

Have you tried Sunon or LDO?  

https://www.printedsolid.com/products/ldo-sunon-fan-mf40100v1-1000c-g99

https://www.printedsolid.com/products/ldo-5015-5v-blower-fan-df5015h05s?variant=21076373667925

 

--------------------
Chuck H
3D Printer Review Blog

Publié : 10/07/2021 12:05 pm
Daniel
(@daniel)
Eminent Member
Topic starter answered:
RE: Drucklüfter (MK3S/+, MINI/+) neue Generation schwächer
Posted by: @cwbullet

How do I tell which fans I have?  I have used FYSETC and they worked for me.  

Have you tried Sunon or LDO?  

https://www.printedsolid.com/products/ldo-sunon-fan-mf40100v1-1000c-g99

https://www.printedsolid.com/products/ldo-5015-5v-blower-fan-df5015h05s?variant=21076373667925

 

It's not about trying it out but yeah, I've tried the FYSETC and LDO, the FYSETC are less powerful than the original Prusa fans, the LDO are more powerful, but the speed monitoring needs to be disabled.

The new Prusa fans I bought last week now have the same throughput as the FYSETC, which is why I removed the FYSETC again, after all I want the same throughput as the old Prusa fans.

I know Prusa's speed control isn't that great, but I wanted the originals again, but this time they're less powerful than the old ones from last year.

Publié : 10/07/2021 12:37 pm
Daniel
(@daniel)
Eminent Member
Topic starter answered:
RE: Print fan (MK3S/+, MINI/+) new generation weaker

Here is a small video of the new and old Prusa fans.

new original Prusa fan:

 

old original Prusa fan:

 

The old ones are of course louder, have more throughput than the new ones, or in other words, the new ones don't have the same speed as the old ones.

Ce message a été modifié il y a 3 years par Daniel
Publié : 10/07/2021 12:40 pm
cwbullet
(@cwbullet)
Membre
RE: Print fan (MK3S/+, MINI/+) new generation weaker

Have you contacted support?  They might be able to point you where to buy the old ones or an equivalent?   

--------------------
Chuck H
3D Printer Review Blog

Publié : 10/07/2021 4:43 pm
Daniel
(@daniel)
Eminent Member
Topic starter answered:
RE: Print fan (MK3S/+, MINI/+) new generation weaker

I've already done it, let's see what comes out of it, just don't think it's okay that Prusa is now selling worse ones.

Publié : 10/07/2021 4:59 pm
Partager :