Kevlar Fibers
I'm going to be extruding onyx with continuous kevlar fiber. I'm wondering would a brass nozzle work or would I be better using hardened or stainless steel.
RE: Kevlar Fibers
Since kevlar and carbon fiber's are quite agressive materials i'd use the ruby nozzle. That one is designed to survive those materials a lot better.
https://www.prusa3d.com/product/the-olsson-ruby/
It's not the cheapest one but you'll defenetivly kill a lot of brass nozzle's with that kind of filament.
RE: Kevlar Fibers
Since kevlar and carbon fiber's are quite agressive materials i'd use the ruby nozzle. That one is designed to survive those materials a lot better. MyVanilla
https://www.prusa3d.com/product/the-olsson-ruby/
It's not the cheapest one but you'll defenetivly kill a lot of brass nozzle's with that kind of filament.
The solution worked for me thanks to the community and the members for the solution.