Notifications
Clear all
Fire and Other Safety Hazards: What is the risk, and what mitigations have users implemented?
Not that I would ever leave my MINI or i3-MKS unattended, but I am interested in others' experience with fire or other potential safety hazards, and mitigations. I am especially interested in Prusa's 24/7 Print Farm experience?
My experience:
- In many hundreds of hours of experience, I have never had a serious safety issue (e.g. - fire, melted or burnt printer component...)
My mitigations:
- Attending to printers, of course.
- IP camera on each printer
- Smart smoke detector in print room that is monitored via phone app (smartthings)
- Remote-controlled receptacles for each printer (smart-plugs).
- Small fire extinguisher in print room.
JG
This topic was modified 4 years temu 2 times by 3DPrintM.D.
Opublikowany : 01/12/2020 2:05 pm
RE: Fire and Other Safety Hazards: What is the risk, and what mitigations have users implemented?
Well... I would going to be a littlebit more professional...
1) Get propper and Certified Smoke Dedector who are Mains Powerd and use a Bus System.
2) Get a (Online) UPS System to prevent Micro Outtakes who are <1sec.
3) Connect the Smoke Dedector to the UPS in the case the when on the UPS Cut immediately the Power.
Opublikowany : 02/12/2020 10:22 pm