A thumbnail post processor for Sapphire Pro/Plus (MKS Robin Nano TFT35) 3D Printers
 
Notifiche
Cancella tutti

A thumbnail post processor for Sapphire Pro/Plus (MKS Robin Nano TFT35) 3D Printers  

  RSS
Henry Thomas
(@henry-thomas)
New Member
A thumbnail post processor for Sapphire Pro/Plus (MKS Robin Nano TFT35) 3D Printers

The PrusaSlicer thumbnail output isn't compatible with my Sapphire Plus printer - but I have standardised my 3D printing workflow around using PrusaSlicer and didn't want to go back to maintaining working configurations on multiple slicers (Read: I am sick and tired of Cura arbitrarily breaking support for my older printers with new releases) -- I digress...

So I was looking around for a post processor that could convert PrusaSlicer thumbnails to MKS Robin Nano TFT25 compatible thumbnails. Nothing I found worked, so I adapted code from the Two Trees Cura plugin and made my own post processor - which I am happy to report works! I am a C programmer not a Python programmer so I was not at all confident, but I could glean the syntax and logic.

Anyhoo I made a repository on Github for my post processing script here: https://github.com/whpthomas/tft-thumbnail

I hope others will find this script helpful.

-h

Postato : 05/10/2022 1:31 am
Sergi e hanno apprezzato
Sergi
(@sergi)
New Member
RE: A thumbnail post processor for Sapphire Pro/Plus (MKS Robin Nano TFT35) 3D Printers

I have followed very carefully your tutorial on previews for mks nano with tft 35It has worked but the preview is not very defined.

attach picture.

What I can do?I have a two trees bluer mks nano 1.2v tft 35

Thanks a lot

 

Posted by: @henry-thomas

The PrusaSlicer thumbnail output isn't compatible with my Sapphire Plus printer - but I have standardised my 3D printing workflow around using PrusaSlicer and didn't want to go back to maintaining working configurations on multiple slicers (Read: I am sick and tired of Cura arbitrarily breaking support for my older printers with new releases) -- I digress...

So I was looking around for a post processor that could convert PrusaSlicer thumbnails to MKS Robin Nano TFT25 compatible thumbnails. Nothing I found worked, so I adapted code from the Two Trees Cura plugin and made my own post processor - which I am happy to report works! I am a C programmer not a Python programmer so I was not at all confident, but I could glean the syntax and logic.

Anyhoo I made a repository on Github for my post processing script here: https://github.com/whpthomas/tft-thumbnail

I hope others will find this script helpful.

-h

 

Postato : 07/11/2022 11:18 pm
Tu hanno apprezzato
Diogo Grunho
(@diogo-grunho)
Utenti
RE: A thumbnail post processor for Sapphire Pro/Plus (MKS Robin Nano TFT35) 3D Printers

Just in case you still need it i made a change to @henry-thomas script to fix this issue with the TwoTrees Bluer printer you can find it at

https://github.com/dgrunho/prusa-wifi-tft-preview

Postato : 20/05/2023 1:04 pm
Tu hanno apprezzato
Condividi: