Notifications
Clear all

400 x 400 Prusa Printer?  

Page 13 / 19
  RSS
Lincoln T
(@lincoln-t)
New Member
RE: 400 x 400 Prusa Printer?

Well, it is excellent new that a Prusa XL is on the horizon, and not even that far off.  I think fans wanted it and it appears like Jo Prusa is delivering a device that will be an upgrade on a few levels aside from just raw surface area.  I hope is it not too much to hope that the Prusa XL Kit will ship, like the Mini, in larger discreet sections.   Overall, I am just happy to see that a Prusa quality and design large bed printer will be available!

Publié : 17/10/2019 5:06 pm
Birdman2010
(@birdman2010-2)
Active Member
RE: 400 x 400 Prusa Printer?
Posted by: @maxcypond

Well, it is excellent new that a Prusa XL is on the horizon, and not even that far off.  I think fans wanted it and it appears like Jo Prusa is delivering a device that will be an upgrade on a few levels aside from just raw surface area.  I hope is it not too much to hope that the Prusa XL Kit will ship, like the Mini, in larger discreet sections.   Overall, I am just happy to see that a Prusa quality and design large bed printer will be available!

That would be great if it shipped in larger discreet sections like the Mini!  This would make sense especially if the price is $1,200 - $1,500 as Josef stated.

Publié : 17/10/2019 5:10 pm
cwbullet
(@cwbullet)
Membre
RE: 400 x 400 Prusa Printer?

I really hope they make the $1200 goal.  

--------------------
Chuck H
3D Printer Review Blog

Publié : 17/10/2019 5:25 pm
ByteC
(@bytec)
Eminent Member
RE: 400 x 400 Prusa Printer?

Hey Joe,

think about a dual extruder option pls and cheers! 🙂

Publié : 23/10/2019 9:32 am
cwbullet
(@cwbullet)
Membre
RE: 400 x 400 Prusa Printer?

@peter-w26

I do not see it happening with the MMU2S.

--------------------
Chuck H
3D Printer Review Blog

Publié : 23/10/2019 9:33 am
Roland S.
(@roland-s)
Active Member
RE: 400 x 400 Prusa Printer?

I would like to see some linear rails for more stiffness. 😍 

_____________________________________________________________________________________________________
Plant trees with this alternate google search machine: https://ecosia.org - Thanks. 🙂

Publié : 23/10/2019 10:30 am
PHIL BZH
(@phil-bzh)
Eminent Member
RE: 400 x 400 Prusa Printer?

Hi,

A Frenchman managed to take a picture of a prototype PRUSA CORE XY printer ... 😎 

https://reho.st/preview/self/da6e6ec92b0f1e8aa69c95eb295fbe0c402cb1ed.jpg
What do you think of this printer prototype ?

Cheers,

An other Frenchman 😜 

Publié : 24/10/2019 2:55 pm
cwbullet
(@cwbullet)
Membre
RE: 400 x 400 Prusa Printer?

@djp92

I am ready to buy now.  

--------------------
Chuck H
3D Printer Review Blog

Publié : 24/10/2019 3:24 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: 400 x 400 Prusa Printer?

That printer on the picture of Frenchman does not quite look like it:

Publié : 24/10/2019 4:59 pm
Chocki
(@chocki)
Prominent Member
RE: 400 x 400 Prusa Printer?

The prototype looks very much like a reworked Mk3.

X axis same motor as current X axis, Y axis, same motor, but a drive rod linking both sides together, Z axis, uses both Z axis motors, and this prototype is still using the existing 8 bit controller as per the MK3, Extruder looks like a Mk3 extruder and the existing einsy rambo is fitted at the rear next to the PSU.

If this is how the core XY printer will look, then it should be considerably less than €1200.

 

I do hope this is just an early prototype to get the printed parts sorted.

Normal people believe that if it ain’t broke, don’t fix it. Engineers believe that if it ain’t broke, it doesn’t have enough features yet.

Publié : 24/10/2019 5:06 pm
Nikolai
(@nikolai)
Noble Member
RE: 400 x 400 Prusa Printer?

I think this is just a proof of concept they are running for quite some time now. The actual Prusa XL will look different.

I'm pretty sure the R&D room with projects under development is not for guests.

Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram

Publié : 24/10/2019 5:07 pm
Sembazuru a aimé
Crawlerin
(@crawlerin)
Prominent Member
RE: 400 x 400 Prusa Printer?

@chocki

No, it's not even that. It's been explained what it is at least 5 months ago if not earlier. While one cannot exclude possibility it was an inspiration, this particular printer will not be sold as XL.

https://www.reddit.com/r/prusa3d/comments/di9ua3/is_this_image_relevant_now/

https://www.reddit.com/r/prusa3d/comments/ccbryv/prusa_big_volume_printer_do_you_think_it_is/

https://imgur.com/a/c9neTDz

Publié : 24/10/2019 5:25 pm
cwbullet
(@cwbullet)
Membre
RE: 400 x 400 Prusa Printer?

I have researched this over the last several hours and I agree that it is a prototype and not quite the XL.  

--------------------
Chuck H
3D Printer Review Blog

Publié : 24/10/2019 5:47 pm
pingu
(@pingu)
Estimable Member
RE: 400 x 400 Prusa Printer?

Just found these: 

Publié : 30/10/2019 5:40 am
cwbullet
(@cwbullet)
Membre
RE: 400 x 400 Prusa Printer?

@pingu

Link?

--------------------
Chuck H
3D Printer Review Blog

Publié : 30/10/2019 10:18 am
dvorkaa03
(@dvorkaa03)
New Member
RE: 400 x 400 Prusa Printer?

https://www.reddit.com/user/josefprusa/

Publié : 30/10/2019 10:35 am
Dan
 Dan
(@dan-2)
Eminent Member
RE: 400 x 400 Prusa Printer?

@pingu

So that is what I am hoping for. I modified the MK2 to the MK2-x and kept the frame until now added some upgrades from Zaribo and Igus cable drag chain. The last upgrade was the Bondtech extruder. So adding the MMU2s to this machine will not happen.

I am waiting for the XL and will add the MMU2 to it. 

Publié : 30/10/2019 10:41 am
cwbullet
(@cwbullet)
Membre
RE: 400 x 400 Prusa Printer?

No official word on MMU on XL, but that would not be a surprise if they do.  

--------------------
Chuck H
3D Printer Review Blog

Publié : 30/10/2019 12:38 pm
pingu
(@pingu)
Estimable Member
RE: 400 x 400 Prusa Printer?

It would surprise me, i guess. As you can see in the prusa mini discussion thread, we are shure the mmu2 will not work with the new 32 bit board. First and obvious problem is the missing conector port for the mmu...

I cant belive prusa is developening one dedicated board for each of their printers. I guess the new 32 buddy board is the new standart für prusa, and will be used on the new core xy aswell.

And lets be honest, the mmu is just a pain in the ass in so many ways. I dont think so it is seen as succsesor by prusa... best guess they try to let the mmu die, but cant do this due so many sold units. The conunity would be fucked up uf they drop mmu2 developement.

And still yesterday my mmu2 clone kit arrived. Gona gibe it a try anyway...

Publié : 31/10/2019 6:35 am
Nikolai
(@nikolai)
Noble Member
RE: 400 x 400 Prusa Printer?

@pingu

Is the schematic of the mini board already online? Do you have a link?

Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram

Publié : 31/10/2019 6:39 am
Page 13 / 19
Partager :