3D printing gears  

RE: 3D printing gears

@bas

Hi Bas,

I'd like to incorporate herringbone gears in my project were they generated in FreeCad ?

Thanks Peter

RE: 3D printing gears

@peter-j-francis

I work with Rhino

See https://discourse.mcneel.com/t/helical-gear-tutorial/54150/13

Cheers,

Bas

RE: 3D printing gears

@peter-j-francis

And have a look to this suggestion how to work with freecad:

https://discourse.mcneel.com/t/helical-gear-tutorial/54150/17?u=bas_goris

RE: 3D printing gears

@bas

sent you a pm.

RE: 3D printing gears

@karl-herbert

Here is my first test with Iglidur i150-PF based on your settings. I have put the fan off, as this is recommended by Igus.

https://www.prusaprinters.org/prints/48764-test-1with-iglidur-i150-pf-filament

RE: 3D printing gears

@bas

Do you like performance and appearance of IGLIDUR so far?

RE: 3D printing gears

@3dalhemija

I can not make a conclusion yet. I need first the print settings for a good print with Iglidur.

RE: 3D printing gears

test if I can upload a 3mf file

The answer is nop

RE: 3D printing gears

Posted by: @bas

test if I can upload a 3mf file

The answer is nop

You need to zip up most file typed to attach them.