[Video] As fast as possible | Pause a print to embed a magnet
Hi guys o/
Not a print per se, but I wanted to share this quick method of pausing and embedding a magnet or anything else in your print:
TL;DW: Press the small Plus Icon in Slic3r Alpha, search and replace `M600` with this gcode to pause the print. Done. If you use OctoPrint remember to press resume in OctoPrint 🙂
First video, i'm shy 😉 Criticism welcome.
Re: [Video] As fast as possible | Pause a print to embed a magnet
Criticism welcome.
Attribution for the G-code you use would be nice.
Peter
Please note: I do not have any affiliation with Prusa Research. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage…
Re: [Video] As fast as possible | Pause a print to embed a magnet
GET THE PRUSA TO STICK IT'S TONGUE OUT!
wonder where that came from!?
:-p
Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
Re: [Video] As fast as possible | Pause a print to embed a magnet
Criticism welcome.
Attribution for the G-code you use would be nice.
Peter
Good job promoting that trick, but yeah you need to give credit for it. Especially since you didn't even change her comments.
Something along the lines of adding a comment to the g-code snippet with a link to where it came from would be enough.
https://shop.prusa3d.com/forum/others-archive--f82/pause-print-in-gcode-t2034.html#p125758
Re: [Video] As fast as possible | Pause a print to embed a magnet
wonder where that came from!?
:-p
Joan
The one and only 😉
Attribution for the G-code you use would be nice.
Peter
Indeed. Kinda did by proxy, as I got it from the 3D printing Nerd video. Will add the direct link to the video description. Oversight on my part.
Re: [Video] As fast as possible | Pause a print to embed a magnet
Thanks Carl.
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
RE: [Video] As fast as possible | Pause a print to embed a magnet
Subbed 🙂 slick video 🙂
RE: [Video] As fast as possible | Pause a print to embed a magnet
Thanks for posting the video. It let me know that there is a much improved version of Slic3r PE.
Steve