Unistrut Rail buttons for very large rockets
Printing rail buttons today for unistrut launch rails.
The grey is printed with Polymaker Polylite Grey ABS
The dark blue is printed with Novamaker Blue ABS
I am not happy with the lines created by the supports but I will keep trying. I am sure the rail will "sand" them off. I did confirm that they fit the rail.
Links to STL Files:
1. Thingverse: https://www.thingiverse.com/thing:4504702
2. Prusa: https://www.prusaprinters.org/prints/35510-unistrut-rail-button
--------------------
Chuck H
3D Printer Review Blog
RE: Unistrut Rail buttons for very large rockets
Nice, i heard that PolyLite ABS warped less than regular ABS, have you experienced this as well?
RE: Unistrut Rail buttons for very large rockets
@3dprintingscience
Absolutely. I love the stuff. I especially like the orange and yellow ABS. I have found that I get great quality prints with less warping.
--------------------
Chuck H
3D Printer Review Blog
RE: Unistrut Rail buttons for very large rockets
@charles-h13
Do you use ASA as well? If so, from which manufacturer? I have been able to achieve excellent results with black DuraPro ASA from extrudr.
Little warping and can be printed very well. The material is also very tough and has a good UV- and heat resistance.
(currently i'm testing this material for new MK3 parts).
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.