T800 - if only I could 3d print the music!!
Hi,
normally I use the Mk2 for my own functional prints where the consistency of the mk2 is fantastic and something I value more than than the final surface finish but every so often it is beautiful to print something phenomenal from an aesthetic point of view, tie it up with some nostalgia, present it with hope, wait for the print to complete... and learn from the feedback. Item on display took 27hrs with variable height - base was ca 0.25mm and skull was ca 0.07mm. Printed with 0.4 nozzle. Hope you like! Took it from https://www.thingiverse.com/thing:438789
Rory
And now for the detail...
Re: T800 - if only I could 3d print the music!!
You could add sound an music:
https://www.adafruit.com/product/2220
Rgds
Re: T800 - if only I could 3d print the music!!
You could add sound an music:
https://www.adafruit.com/product/2220
Rgds
Hobby is sim-racing and am in the middle of a project printing flappy paddles and housing unit with buttons etc. I have the 32u4 programmed up as the control unit - https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/overview - so don't be putting ideas in my head!! 😀