Notifications
Clear all

Print Challenge  

  RSS
bob.s
(@bob-s)
Eminent Member
Print Challenge

For those of you that enjoy a challenge, here is a print that I have been struggling with for weeks: http://www.thingiverse.com/thing:779362/#files

It's a Darth Vader ring. I have not been able to get a finished print using Slic3r no matter what I tried. I have managed to get a complete print using CraftWare, but the quality is not great. I'm trying to print at 50 microns.

If anybody can get a nice print of this please share your settings and bask in the glory!

Opublikowany : 16/02/2017 7:01 pm
Knickohr
(@knickohr)
Member Moderator
Re: Print Challenge

Boahhh, you're crazy.

Why are these files so big ? 😯

OK, will give it a try if some filament is left on the spool. By the way, rotate it by -80° in x-axis.

I made one for you 😉

This is maybe an candidate for some acetone-smoothing !

Thomas

Opublikowany : 16/02/2017 8:32 pm
Rumbledethumps
(@rumbledethumps)
New Member
Re: Print Challenge

50 micron PLA 80 mins.

Opublikowany : 18/02/2017 5:53 am
bob.s
(@bob-s)
Eminent Member
Topic starter answered:
Re: Print Challenge

So, finally getting back to this. I printed mine standing up!

Never got Slic3r to do it though. This is from CraftWare.

Opublikowany : 11/05/2017 8:48 pm
Share: