Notifications
Clear all

PETG Roses  

  RSS
GertL
(@gertl)
Reputable Member
PETG Roses

eSUN PETg.
https://www.thingiverse.com/thing:152642

---
Gert

Opublikowany : 22/08/2017 3:27 pm
Ty polubić
JoanTabb
(@joantabb)
Veteran Member Moderator
Re: PETG Roses

Nice!

Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Opublikowany : 22/08/2017 6:48 pm
freedom2000
(@freedom2000)
Active Member
Re: PETG Roses

really nice result.

WHen printing PETG I always have ugly small threads of PETG when the head is going from one layer to the other...
It seems that you don't have this defect ?

JP

Opublikowany : 02/09/2017 3:25 pm
GertL
(@gertl)
Reputable Member
Topic starter answered:
Re: PETG Roses

WHen printing PETG I always have ugly small threads of PETG when the head is going from one layer to the other...
It seems that you don't have this defect ?

I almost have zero stringing from PETg.
I use eSUN PETg.

240C/80C
40mm/s - First layer 50%
retraction 0.8

I actually almost never use PLA anymore since the PETg works so good for me.

---
Gert

Opublikowany : 02/09/2017 5:08 pm
dennis.h5
(@dennis-h5)
New Member
Re: PETG Roses

Very nice!

Opublikowany : 05/09/2017 9:15 pm
christopher.m6
(@christopher-m6)
Active Member
Re: PETG Roses


WHen printing PETG I always have ugly small threads of PETG when the head is going from one layer to the other...
It seems that you don't have this defect ?

I almost have zero stringing from PETg.
I use eSUN PETg.

240C/80C
40mm/s - First layer 50%
retraction 0.8

I actually almost never use PLA anymore since the PETg works so good for me.

Gerg, do you find that PETG sticks to the bed better/stronger than PLA? I was thinking about getting into the ESUN PETG to print the 3d labprint Planes..

Thanks,

Opublikowany : 09/09/2017 2:53 am
GertL
(@gertl)
Reputable Member
Topic starter answered:
Re: PETG Roses

Hi Christoper.

Sorry for the late reply, I'm out in the Swedish wilderness hunting moose 🙂
Finally got some time to catch up with all the great inputs on this forum.

(also miss my printer since 14 days now)

Yes, PETg can stick like hell to the PEI. I prep with 90% IPA and then rub it off with Windex (Window cleaner). The window cleaner helps getting the PETg off easier.

---
Gert

Opublikowany : 20/09/2017 12:28 pm
Share: