Our Experience With 3D ColorPrint Application
After a couple of attempts, we figured out how to set up the color change correctly. It is easy to make a mistake and apply it too early.
We turned some into fridge magnets 😀
http://3dwithus.com/multicolor-3d-printing
- a reliable resource and a helping tool for those who are in design and 3D printing
Re: Our Experience With 3D ColorPrint Application
Man those came out good, that boat is really nice
Re: Our Experience With 3D ColorPrint Application
Man those came out good, that boat is really nice
lol. Sorry, 3D printed ones are just 4 in the bottom. We feel that they look as good as the ones bought in a shop and can be used as magnets on the fridge.
- a reliable resource and a helping tool for those who are in design and 3D printing
Re: Our Experience With 3D ColorPrint Application
Yep, good prints. But didn't you just use the layer color switching command in the gocde? any other suggestions in using it?
Re: Our Experience With 3D ColorPrint Application
Yep, good prints. But didn't you just use the layer color switching command in the gocde? any other suggestions in using it?
First time we used MK2 Change Filament on-screen option. Then we tried http://www.prusaprinters.org/color-print application.
We used our slicer software to count layers. We know that it is possible to apply code in slicer software but we are not that good at coding.
- a reliable resource and a helping tool for those who are in design and 3D printing
Re: Our Experience With 3D ColorPrint Application
OK.. Btw, nice prints!
Re: Our Experience With 3D ColorPrint Application
OK.. Btw, nice prints!
Thanks 😀
- a reliable resource and a helping tool for those who are in design and 3D printing