More Prints  

More Prints

Decided to post some of the things I've printed with my 3mm version of the i3. I'm using Slic3r, OctoPrint on OctoPi with my setup here ( http://shop.prusa3d.com/forum/viewtopic.php?f=14&t=167 ). Everything in white is natural ABS, clear is translucent PLA and there might be some in black PLA.

Vial Holder
I designed and printed this to hold 4 large and 5 small vials in an oil bath which would previously fall over during my girlfriend's chemistry experiments. Unfortunately the only one I have pictures of (Of the 4 I printed for her lab) had the filament get stuck half way through while unwinding from the spool and caused a notch in the legs.

Model: http://www.thingiverse.com/thing:1047189
Timelapse:

Mars Rover Small
Printed version of the small NASA Mars Rover. The wheels didn't come out so well and took a lot of failed attempts to get right. I think they would work better in PLA.

Model: http://nasa3d.arc.nasa.gov/detail/mars-rover-curiosity

Nexus 6p Model
I created and printed this to get a feel for the phone before ordering it as I was afraid it would be too big.

Model: http://www.thingiverse.com/thing:1044716
Timelapse:

Whiteface Mountain
Model of Whiteface Mountain in Lake Placid. Generated with and touched up with Blender. Printed in translucent PLA. Unfortunately, I turned the light off for most of this print.

Model: http://www.thingiverse.com/thing:1047296
Timelapse:

Other
Other things I've made are here http://www.thingiverse.com/Verris/makes
Things I've designed and made are here http://www.thingiverse.com/Verris/designs
A few other designs and designs-in-progress are here https://www.tinkercad.com/users/eoMiRB3cvzo-rossmay1