Notifications
Clear all
Topic starter
answered:
RE: Large scale print
Statue Anchor of Hope, 160 cm tall. Layer 0,15 micron, Nozzle 0,4 mm, 32 parts.
Total printing time 704 h(10 days - 3 printers).
Material PLA 2843 m.
Original bronze statue scan upscale for molding.
Scanning method: photogrammetry .
Scan by http://www.727.sk./
Sculptor https://www.janabrisudova.com/
Napsal : 02/10/2019 8:05 pm