Notifications
Clear all

Half Timber building  

  RSS
cdollins
(@cdollins)
Active Member
Half Timber building

This was the first building I made with a 3d printer. I was trying out various surface textures and techniques. The material was ABS. The scale is HO. No known prototype.

Posted : 26/12/2018 9:22 pm
cdollins
(@cdollins)
Active Member
Topic starter answered:
Re: Half Timber building

The STL files for this building can be downloaded free at charles.dollins.org/buildings/ This building is printed as a kit as flats. There over 50 pieces. The model was painted as assembled.

Posted : 26/12/2018 10:17 pm
Mustrum Ridcully
(@mustrum-ridcully-2)
Honorable Member
Re: Half Timber building

Charles these are fine works and my friends just gifted me with a 4 x 8 sheet with HO tracks (and it as a total coincidence so I may actually do some thing with this failed garage sale find)
I taught mountain flying in the rockies in the 1970s so I know some of these locations of your models quite well.

Posted : 27/12/2018 12:09 am
Share: