Notifications
Clear all

Gear Machine  

  RSS
Bream
(@bream)
New Member
Gear Machine

Printed on a Mk3, with PETG gears and PLA frame, a few brass rods, screws and skateboard bearings.

The flywheel is also PLA, with some brass weights added around it to give it more inertia.

This was based on the wooden kinetic art piece by Ed Ledger.

The video just shows a brass screw for the handle, but I added a nice PLA sleeve to go over that a little later.

Opublikowany : 07/03/2019 2:50 pm
Steve
(@steve-3)
Estimable Member
Re: Gear Machine

Nice. I really like the "brass" color for the gears.

Steve

Opublikowany : 03/04/2019 11:22 pm
DHenss
(@dhenss)
Active Member
RE: Gear Machine

Great print.  Would you be willing to share the files so I can give it a shot.

Thanks

 

Opublikowany : 25/04/2019 4:06 pm
Asus1357
(@asus1357)
Trusted Member
RE: Gear Machine

I would also love to try and print this if you are willing to share your files?

Opublikowany : 09/09/2022 1:29 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Gear Machine

https://de.3dexport.com/3dmodel-making-a-gear-machine-404294.htm

wbr,

Karl

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Opublikowany : 09/09/2022 2:07 pm
Skipper_52
(@skipper_52-2)
Trusted Member
RE: Gear Machine

Nice job. A little more weight on that flywheel would help it spin longer.

 

Opublikowany : 01/10/2022 9:12 pm
Share: