Updating PrusaLink .70RC3 to .70
 
Notifications
Clear all

Updating PrusaLink .70RC3 to .70  

  RSS
x19
 x19
(@x19)
Active Member
Updating PrusaLink .70RC3 to .70

Should the built in updater work? Otherwise, what's the proper workflow to update PrusaLink? Just erase a reinstall on the SD card?

The built in updater fails with a "409 Unavailable update" for me — Pi4 with Mk3s

Opublikowany : 25/05/2023 5:50 pm
Tojik
(@tojik)
Member Moderator
RE: Updating PrusaLink .70RC3 to .70

Yup, load a new image onto the SD card. Welp, there is no image with the 0.7.0 yet, so please wait for that

Opublikowany : 25/05/2023 5:55 pm
x19
 x19
(@x19)
Active Member
Topic starter answered:
RE: Updating PrusaLink .70RC3 to .70

Cool, appreciate the quick response. I'll do that....once the image is available.

Opublikowany : 25/05/2023 5:56 pm
Patrick.b
(@patrick-b)
Noble Member
RE: Updating PrusaLink .70RC3 to .70

Tojik i did upload and install the im .70 ! and from my side i feel it's way slower to upload files from slicer to prusalink i just test and 29Mo need 48sc ..it's still sc but just for 29mo !!! i know i read some post about this but before i didn't have this slow ''motion'' and also as said in another post the dash board changed after print done the last print disappear !!

any option or idea or next improvement for this point ?

Opublikowany : 28/06/2023 9:40 am
Share: