Notifications
Clear all
Lost access to Pi Camera after 0.70 prusa link
Might be coincidence but just had to reflash an SD card for pruslink (last one got too hot and died) and now with the latest version 0.7 I appear to have lost access to the physically connected Pi camera (via ribbon cable to pi zero W) ? Just me or anyone else?
Opublikowany : 12/09/2023 4:03 pm
RE: Lost access to Pi Camera after 0.70 prusa link
Watching this. You can however enable ssh and try running prusalink stop to stop prusalink, then libcamera-hello --list-cameras to see if the camera appears at least there. If not, the problem should be in HW
Opublikowany : 12/09/2023 4:18 pm
Topic starter
answered:
RE: Lost access to Pi Camera after 0.70 prusa link
exactly what I am doing right now 🙂
Opublikowany : 12/09/2023 4:23 pm
RE: Lost access to Pi Camera after 0.70 prusa link
Noice
Opublikowany : 12/09/2023 4:37 pm
Topic starter
answered:
RE: Lost access to Pi Camera after 0.70 prusa link
New Pi zero W (camera connector clamp was looking past its best) - new image of 0.7 and camera linked and all now working. Must have forgotten about linking the camera to PrusaLink via the Pi web setup page.
Opublikowany : 12/09/2023 4:54 pm
Tojik polubić