Notifiche
Cancella tutti
Fused parts on "MMU3 printable parts" pre-sliced G-codes UNIT2 for MK4IS
Error in G-codes for MK4 MMU3: https://www.printables.com/model/531604-mmu3-printable-parts/files
File with problem: MMU3_UNIT2_MK4IS_7h30m.bgcode dated July 9, 2024
Originally reported by user @Bjorn_48610 See comments and photo: https://www.printables.com/model/531604-mmu3-printable-parts/comments/1917267
one of the mmu3-frame-holder-R4 parts is positioned too close to the mmu3-selector-finda-R4. They were attached.
I had the same problem as the two users who posted there, so at least 3 users with that failure mode.
Please update the MK4IS pre-sliced G-codes.
Postato : 16/07/2024 12:21 am
Topic starter
answered:
RE: Fused parts on "MMU3 printable parts" pre-sliced G-codes UNIT2 for MK4IS
I see a new file replacing this one was posted at the link above, 2 August, 2024.
I have not printed, but it does look visibly separated in the rendering. I'll mark this Solved.
Postato : 13/08/2024 12:08 am