Notifiche
Cancella tutti
Print Break on part
i just do not get it just some layers seems to be the problems what can it be the problem
Postato : 12/12/2021 12:52 pm
Which filament are you printing? It looks damp BTW, look up threads here about drying.
Please export your project as a .3mf ( File > Save project ), zip it and post it here, that will let us check your settings.
Cheerio,
Postato : 12/12/2021 7:33 pm
Topic starter
answered:
RE:
i`ts PETG galaxy black
Postato : 12/12/2021 7:45 pm
OK, definitely dry it.
.3mf ?
Cheerio,
Postato : 13/12/2021 2:08 am
Topic starter
answered:
RE:
I have try whit Matt PLE
this whit 0.6 nozel and 0.3 leyer
Questo post è stato modificato 3 years fa da EffectStyle
Postato : 13/12/2021 11:48 am
Usually layer weaknesses apply across the whole model but yours appears only to affect one side.
Please export your project as a .3mf ( File > Save project ), zip it and post it here, that will let us check the dimensions and your settings.
Cheerio,
Postato : 13/12/2021 12:21 pm
Topic starter
answered:
RE: Print Break on part
The only thing add it is ironing
Postato : 13/12/2021 1:09 pm
Topic starter
answered:
RE: Print Break on part
the problems was in the X axis
Postato : 18/12/2021 1:06 pm