Layer seams more visible on Mini vs MK3S  

RE: Layer seams more visible on Mini vs MK3S

I'm having the same issues posted above.  Pre-sliced gcode files provided by Prusa on the USB drive print almost  flawlessly in this regard; however, any .stl or .3mf files that I download and slice manually with PrusaSlicer 2.3.3 end up having these bumps.  I messed around with settings for a while and couldn't solve the problem.  Disabling wipe while retracting, printing external perimeter first, adjusting retraction speeds and distances, etc.  Eventually I just gave up and have been learning (or attempting) to live with it.  

Clearly  it still aggravates me, though.

RE: Layer seams more visible on Mini vs MK3S

I'm seeing the same issue on some models. A couple in particular with large, smooth bodies really showed the layer seams. A number of other models I've been printing have complex shapes, so the seams are well hidden. I haven't really dug into researching how to address this yet, but some quick tips would be helpful.