Avisos
Vaciar todo
yourfellow2467
Grupo: Registrado
Registrado: 2018/02/07
Active Member
1
| I've had the MK3 for a few months now. I was quite satisfied... | hace 6 years | |
| Just kinda fyi I've had really good luck with Slic3r Prusa E... | hace 7 years | |
| Your Z axis is wayyy too high. You're basically printing lin... | hace 7 years | |
| Your Z axis is wayyy too high. You're basically printing lin... | hace 7 years | |
| Prints don't stick and first layer issues... | hace 7 years | |
|
I agree, nothing looks wrong. Try feeding the filament in, w... En el foro Others (Archive) |
hace 7 years | |
|
Crap, seems like I'll have to do the thing that I specifical... En el foro Others (Archive) |
hace 7 years | |
|
4. Use the sharp pointy thing that looks like a sharp pointy... En el foro Others (Archive) |
hace 7 years | |
|
1. Preheat the nozzle
2. Unload the filament.
3. Press and h... En el foro Others (Archive) |
hace 7 years | |
|
Can't insert filament En el foro Others (Archive) |
hace 7 years |