Benachrichtigungen
Alles löschen
theodor.s
Gruppe: Registriert
Beigetreten: 2017/04/27
Active Member
1
| Have the same problem, first layer is terrible! Mine is very... | Vor 6 years | |
|
Extruder problem Im Forum Others (Archive) |
Vor 7 years | |
|
Bad first layer and weird heatbed temperature curve Im Forum Others (Archive) |
Vor 7 years | |
|
Now, this is one rough crocodile
It also has a very sever... Im Forum Others (Archive) |
Vor 7 years | |
|
Actually, lowering the z-height more than I would normally d... Im Forum Others (Archive) |
Vor 7 years | |
|
I tried out the 0.6mm nozzle and the Slic3r settings, but it... Im Forum Others (Archive) |
Vor 7 years | |
|
Tried this out, and I could not see any real over extrusion ... Im Forum Others (Archive) |
Vor 7 years | |
|
No problem.
Also keep in mind that you need to change the ... Im Forum Others (Archive) |
Vor 7 years | |
|
0.6 mm nozzle Im Forum Others (Archive) |
Vor 7 years | |
|
I bought this: , it features nozzles from 0.25 to 0.8 mm.
A... Im Forum Others (Archive) |
Vor 7 years | |
|
Uneven layers and bad top layer Im Forum Others (Archive) |
Vor 7 years | |
|
MK2S OpenScad files Im Forum Others (Archive) |
Vor 7 years |