Prusa3D Forum

Benachrichtigungen

Alles löschen

slippyr4

Gruppe: Registriert

Beigetreten: 2017/07/06

Eminent Member

	You want a layer height that corresponds to a full step, so ... Im Forum Others (Archive)	Vor 7 years
	Didn’t notice this thread before. Is the port of prusa f... Im Forum Software (Archive)	Vor 7 years
	Redo your calibration from pronterface with. M45 V2 and you ... Im Forum Others (Archive)	Vor 7 years
	I’ve been looking into the MK3 firmware a bit (I maintain a ... Im Forum Others (Archive)	Vor 7 years
	Underextrusion. Either your filament got snagged, or your s... Im Forum Others (Archive)	Vor 7 years
	It means the endstop is being hit at the point it finds it. ... Im Forum Others (Archive)	Vor 7 years
	Try a bit less retraction. And try without z hop. Im Forum Others (Archive)	Vor 7 years
	If you want to be bewildered with details, redo your calibra... Im Forum Prusa i3 kit (Archive)	Vor 7 years
	The only one that really "matters" is the skew angle. The ot... Im Forum Prusa i3 kit (Archive)	Vor 7 years
	Some parts changed between MK2 and MK2S branches. However,... Im Forum Others (Archive)	Vor 7 years
	Looks like you need some spares then. If you're in the U.K.... Im Forum Others (Archive)	Vor 7 years
	The prusa logo always seems to overextrude for me. I don't k... Im Forum Others (Archive)	Vor 7 years
	Sounds like the power supply has failed Im Forum Others (Archive)	Vor 7 years
	Full disclosure: I have a self built clone of a MK2S, and tw... Im Forum Others (Archive)	Vor 7 years
	Yes, they are NEMA 17 What makes you think you are having o... Im Forum Others (Archive)	Vor 7 years
	Also, why are you using 100% infill? That's a huge waste of ... Im Forum Prusa i3 kit (Archive)	Vor 7 years
	My clone bed is just the same. I think that some (perhaps al... Im Forum Others (Archive)	Vor 7 years
	There is a rumoured new textured heated bed. Im Forum Others (Archive)	Vor 7 years
	Do the calibration from pronterface with M45 V2 and then pas... Im Forum Others (Archive)	Vor 7 years
	Filament spool turning freely? Im Forum Others (Archive)	Vor 7 years

Seite 1 / 3 Nächstes

Forums-Statistiken

559 Foren

63.1 K Themen

443.9 K Beiträge

22 Online

68.1 K Mitglieder

Letzter Beitrag: MK4S high flow nozzle and lack of power Unser neuestes Mitglied: etiennep Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen