|
I wonder why for .2 layer height slic3r settings from Prusa ... En el foro Print tips (Archive) |
hace 9 years |
|
Ah I see. So if I chose to do .1 layer height I would need t... En el foro Print tips (Archive) |
hace 9 years |
|
Question: Why would you want to set the first layer height ... En el foro Print tips (Archive) |
hace 9 years |
|
Change the first layer height to 75% (75% of 0.2 is 0.15)
Th... En el foro Print tips (Archive) |
hace 9 years |
|
Simplify3D 1st layer height setting En el foro Print tips (Archive) |
hace 9 years |
|
I have noticed this as well. I've tried slowing printing spe... En el foro General discussion, announcements and releases |
hace 9 years |
|
This is a great one, fits perfectly compared to the other on... En el foro Improvements (Archive) |
hace 9 years |
|
I use bed level correct since right side was closer to nozzl... En el foro Others (Archive) |
hace 9 years |
|
Wow, I didn't even realize this. I guess for now I need to s... En el foro Others (Archive) |
hace 9 years |
|
FYI layer 2 shows .35 on lcd so I think it is actually doing... En el foro Others (Archive) |
hace 9 years |
|
I also see .20 initial height even though I installed 3.0.6 ... En el foro Others (Archive) |
hace 9 years |
|
I would have thought the bed level adjustment would be based... En el foro Others (Archive) |
hace 9 years |
|
That's great to finally see, very cool! En el foro Awesome prints (Hall Of Fame) |
hace 9 years |
|
So I ended up setting live adjust Z to -.6, way lower than b... En el foro Others (Archive) |
hace 9 years |
|
Help with Bed Level Correct En el foro Others (Archive) |
hace 9 years |
|
In my case when I swapped usb cable to a different one I was... En el foro Software (Archive) |
hace 9 years |
|
Yeah, that is because the feature is in 3.0.6 RC3 and the he... En el foro Others (Archive) |
hace 9 years |
|
I checked out:
But even thou I have 3.0.6 rc2 I don't have ... En el foro Others (Archive) |
hace 9 years |
|
Went to bed with first 2 levels fine. Woke up and see the fi... En el foro Print tips (Archive) |
hace 9 years |
|
I redid the gcode* with a .4 zlift, 190/60 temp, slowed down... En el foro Print tips (Archive) |
hace 9 years |