|
Ben
It is simply a model from Thingiverse, stretched to len... En el foro Others (Archive) |
hace 9 years |
|
Yeah, on mine, the red lead goes to pin 10 at both ends.
Pi... En el foro Others (Archive) |
hace 9 years |
|
I printed something similar, but for the parts where 2 beari... En el foro Others (Archive) |
hace 9 years |
|
Johnny
It could be the seam, but without a photo, it is ver... En el foro How do I print this? (Printing help) |
hace 9 years |
|
Yes, I saw that and was confused, simply because running V2C... En el foro Others (Archive) |
hace 9 years |
|
I do have a tendency to agree with Sascha's comments here, a... En el foro Improvements (Archive) |
hace 9 years |
|
Nigel
Sincere condolences for your loss.
Personally when p... En el foro Others (Archive) |
hace 9 years |
|
James
There is obviously an extrusion issue with the print.... En el foro Prusa i3 kit (Archive) |
hace 9 years |
|
Yeah, with some slicers, there are other parameters as well,... En el foro Print tips (Archive) |
hace 9 years |
|
David
Remove the extruder fan, heat the extruder and push s... En el foro Prusa i3 kit (Archive) |
hace 9 years |
|
Dominik
The photo shows that the print has lifted (warped) ... En el foro Others (Archive) |
hace 9 years |
|
Are both the Y threaded rods fully home in the Z frame slots... En el foro Others (Archive) |
hace 9 years |
|
Ben
There is a 12V supply available on one of the headers o... En el foro Others (Archive) |
hace 9 years |
|
Yes, even the skirt is displaying a huge over-extrusion (pul... En el foro Prusa i3 kit (Archive) |
hace 9 years |
|
Another possibility is a damaged PTFE tube. You could try t... En el foro Prusa i3 kit (Archive) |
hace 9 years |
|
Sounds as though your only option is to dismantle the hot en... En el foro Prusa i3 kit (Archive) |
hace 9 years |
|
Hi Patrik
You could try with a different slicer; you could ... En el foro Print tips (Archive) |
hace 9 years |
|
Christophe
Don't get involved; just leave the poor man to h... En el foro Others (Archive) |
hace 9 years |
|
Personally, I would look at other things before adjusting th... En el foro Print tips (Archive) |
hace 9 years |
|
Hi Jordan
The probe is an induction sensor which triggers o... En el foro Assembly and first prints troubleshooting |
hace 9 years |
