|
Slicer links broken En el foro Hardware, firmware and software help |
hace 6 years |
|
Over extrusion on solid infill En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Hi guys!
Just want to report that first dome came out prett... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Yeah, just thought the same the moment I posted the comment.... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Peter,
It is all true. If it is tiny amount of paint that w... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Peter,
It is all very weird with that lifting. In this prin... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
This is definitely one way of doing that. But you risk damag... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
I second the bed leveling problem. Have the same issue with ... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Peter,
Is the blue tape any different than yellow masking t... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Hi Peter,
There shouldn't be any drafts and my plan exactly... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Hi Josef,
Thank you for the g-code! I will give it a try th... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Ho Josef,
I am printing from SD and all the prints were don... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Hi Josef and Peter,
I have already done the thin wall cube ... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Hi Peter,
I am using Slic3r and printing PLA 1.75
0.2mm re... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Hi
So today happened yet another weird thing with my printe... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Peter!
Firstly, I want to thank you for all the time and ad... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Peter,
I am just doing that. Look at the filament, there i... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Peter,
Do I also have to remove PTFE tube? I will need to r... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Hi Peter,
Thank you for your advise. Unfortunately, I didn... En el foro Prusa i3 kit (Archive) |
hace 10 years |
|
Hi Peter!
I am printing white PLA 210/50 hot end/bed temper... En el foro Prusa i3 kit (Archive) |
hace 10 years |
