Avisos
Vaciar todo
mb
Grupo: Registrado
Registrado: 2022/07/30
Eminent Member
2
| Infill for this project is set at 50%. However, the crashes ... | hace 2 years | |
| Believe it or not, I searched for this before asking. I'd ap... | hace 2 years | |
| Y Axis moves easily by hand. Wire bundle is free. | hace 2 years | |
| Y axis crashes and layer shifting | hace 2 years | |
|
Nylon help En el foro How do I print this? (Printing help) |
hace 3 years | |
| This was just printed from the attached 3mf project file. | hace 3 years | |
| I did another first layer calibration. Do I need to do a ful... | hace 3 years | |
| Changed to 0.6 nozzle, not great results | hace 3 years | |
| I had a similar thought about the live Z, so I worked with i... | hace 3 years | |
| Great run...then persistent fail | hace 3 years | |
| The ones that come in the suction sets don't have a flashlig... | hace 3 years | |
| At my wits end | hace 3 years |
Página 2 / 2
Anterior