JuanCholo – Aktivität – Prusa3D Forum

Benachrichtigungen

Alles löschen

JuanCholo

Gruppe: Registriert

Beigetreten: 2017/01/08

Honorable Member

	i talked a little about stuff in here and here Im Forum Print tips (Archive)	Vor 7 years
	if i remember i'll post my settings. you have to run it supe... Im Forum Print tips (Archive)	Vor 7 years
	i forgot in my original post. when i start the print with H... Im Forum Print tips (Archive)	Vor 7 years
	newest firmware issues required changes to print settings Im Forum Print tips (Archive)	Vor 7 years
	oh you do have to bake it extensively before use. it absorb... Im Forum Print tips (Archive)	Vor 8 years
	well some of the strength was obvious as i had parts complet... Im Forum Print tips (Archive)	Vor 8 years
	i found 215 was a little too high i was having issues lots o... Im Forum Print tips (Archive)	Vor 8 years
	you need to test your prints for strength, the default setti... Im Forum Print tips (Archive)	Vor 8 years
	I've used vacuum bags, it becomes an issue with nylon becaus... Im Forum Print tips (Archive)	Vor 8 years
	IMGBOX turned out to be worse then photobucket and i need to... Im Forum Awesome prints (Hall Of Fame)	Vor 8 years
	i've had to start all over with my photos thanks to photobuc... Im Forum Awesome prints (Hall Of Fame)	Vor 8 years
	try reducing the tension on the 2 screws that tension the Na... Im Forum Others (Archive)	Vor 8 years
	photobucket just died for the entire world.. maybe it was t... Im Forum Awesome prints (Hall Of Fame)	Vor 8 years
	Re: dan's projects Im Forum Awesome prints (Hall Of Fame)	Vor 8 years
	yup razor blades are actually the best tool for removal, i p... Im Forum Print tips (Archive)	Vor 8 years
	ok i learned if you do change the setting for the nozzle to ... Im Forum Print tips (Archive)	Vor 8 years
	forced under extruding with slic3r? Im Forum Print tips (Archive)	Vor 8 years
	its not hard to change but messy. for me i didn't want to t... Im Forum Print tips (Archive)	Vor 8 years
	yup they will go away on the next bed heatup,, you can move ... Im Forum Print tips (Archive)	Vor 8 years
	double check the bed heat sensor under the machine that it d... Im Forum Print tips (Archive)	Vor 8 years

Seite 23 / 27 Vorherige Nächstes

Forums-Statistiken

565 Foren

63.9 K Themen

447.8 K Beiträge

22 Online

69.6 K Mitglieder

Letzter Beitrag: Filament leak? Unser neuestes Mitglied: Mechman0124 Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen