|
I would try reducing the speed if you are still printing at ... Im Forum Print tips (Archive) |
Vor 7 years |
|
I have confirmed that the issue is not the filament, a new s... Im Forum Print tips (Archive) |
Vor 7 years |
|
I've printed a part sliced with all three versions and they ... Im Forum Print tips (Archive) |
Vor 7 years |
|
Layer heights have remained the same and thanks for the othe... Im Forum Print tips (Archive) |
Vor 7 years |
|
I just ordered some nozzle cleaning filament yesterday to tr... Im Forum Print tips (Archive) |
Vor 7 years |
|
Hi Martin,
the red you see on the preview screen indicates i... Im Forum Print tips (Archive) |
Vor 8 years |
|
A late reply is better than no reply. 😉 Perimeters and top... Im Forum Print tips (Archive) |
Vor 8 years |
|
This looks like it might be caused by where the printer star... Im Forum Print tips (Archive) |
Vor 8 years |
|
What type of part is this that you are testing the strength ... Im Forum Print tips (Archive) |
Vor 8 years |
|
Most likely this is happening because the Prusa Slic3r autom... Im Forum Print tips (Archive) |
Vor 8 years |
|
I've had good results in eliminating this by turning off the... Im Forum Print tips (Archive) |
Vor 8 years |
|
Here is a better comparison picture of the issue. I have use... Im Forum Print tips (Archive) |
Vor 8 years |
|
Welcome Michael, I do use the part cooling fan while printin... Im Forum Print tips (Archive) |
Vor 8 years |
|
Thanks for the advice, I dried the filament in the oven yest... Im Forum Print tips (Archive) |
Vor 8 years |
|
Yes, they were both printed at 80C/240C with the all the sam... Im Forum Print tips (Archive) |
Vor 8 years |
|
Semi-transparent PETG changed after drying Im Forum Print tips (Archive) |
Vor 8 years |
|
What are your filament settings? i.e. extrusion multiplier, ... Im Forum Print tips (Archive) |
Vor 8 years |
|
Downloading the latest version of Prusa Slic3r (1.36.2) shou... Im Forum Print tips (Archive) |
Vor 8 years |
|
So I decided to just test and see if the layer height made a... Im Forum Print tips (Archive) |
Vor 8 years |
|
Same cooling and speed except I have fan disabled for first ... Im Forum Print tips (Archive) |
Vor 8 years |
