Prusa3D Forum

Benachrichtigungen

Alles löschen

Dakong

Gruppe: Registriert

Beigetreten: 2021/11/14

Active Member

	I used the stock Mk3S+ printer profile with the same result:... Im Forum Hardware, firmware and software help	Vor 3 years
	Thanks, it seemed so to me also. Much too big for shrinkage... Im Forum Hardware, firmware and software help	Vor 3 years
	calibration_cube.3mf Are the slicer's current settings in th... Im Forum Hardware, firmware and software help	Vor 3 years
	The print at 0.2mm layer thickness completed with the same r... Im Forum Hardware, firmware and software help	Vor 3 years
	calibration_cube.3mf I've uploaded the 3mf file here. Im Forum Hardware, firmware and software help	Vor 3 years
	Print using "shape-box" added from within PrusaSlicer just f... Im Forum Hardware, firmware and software help	Vor 3 years
	calibration_cube.amf File format "3mf" was not available for... Im Forum Hardware, firmware and software help	Vor 3 years
	The layer height is set at 0.3mm, which is the default, I be... Im Forum Hardware, firmware and software help	Vor 3 years
	Objects Printed with MK3S+ Different Dimensions than PrusaSl... Im Forum Hardware, firmware and software help	Vor 3 years

Forums-Statistiken

565 Foren

64 K Themen

448.3 K Beiträge

17 Online

69.9 K Mitglieder

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen