Prusa mini Fysetc clone - log of a journey - User mods - OctoPrint, enclosures, nozzles, ...

RE: Prusa mini Fysetc clone - log of a journey

Adi — Tue, 10 Feb 2026 10:22:15 +0000

Thanks!!! Imma try to moment I'll be done with work haha

RE:

Turro75 — Mon, 09 Feb 2026 23:13:37 +0000

due to network issue I didn't upload the patch file. here You are

62244599-fysetc_640.patch_.zip

RE: Prusa mini Fysetc clone - log of a journey

cwbullet — Mon, 09 Feb 2026 20:39:40 +0000

Thanks.  I can't wait to try them.

RE: Prusa mini Fysetc clone - log of a journey

_KaszpiR_ — Mon, 09 Feb 2026 20:33:33 +0000

I'm afraid you did not attached the files properly.

RE: Prusa mini Fysetc clone - log of a journey

Turro75 — Mon, 09 Feb 2026 19:58:54 +0000

this is the patch

RE: Prusa mini Fysetc clone - log of a journey

Turro75 — Mon, 09 Feb 2026 19:57:33 +0000

this is the patch

RE: Prusa mini Fysetc clone - log of a journey

Turro75 — Mon, 09 Feb 2026 19:53:50 +0000

Hi All,

I applied all the previous patches to 6.4.0 ( git checkout b91eeda )

Attached all the firmwares and the patch applied.

Not extensively tested as at the moment the printer is out of order waiting for a new heater block.

932e773f-fysetcmini_640.zip

RE: Prusa mini Fysetc clone - log of a journey

adambennette — Thu, 08 Jan 2026 16:44:21 +0000

You are indeed most estimable ! worked for me (you must put both files on a the root folder of a USB stick with no other files with bbf suffix.)

thank you,

AdamBennette

RE: Prusa mini Fysetc clone - log of a journey

Kenyiro34 — Thu, 16 Oct 2025 11:41:40 +0000

can you linked ??? and filament sensor working ??

RE: Prusa mini Fysetc clone - log of a journey

Kenyiro34 — Thu, 16 Oct 2025 11:40:40 +0000

hey m8 why this firmware not work filament sensor ?? any possible to work it ?

Posted by: @turro75
Hi All,
I updated the patch file to the latest 6.1.2 to enable also the skew correction.
For those who want to build it on his own this is the sequence (I'm on MAC M2):
First of all ensure You are using python3.11 or the build process will fail, on Mac I use the following commands in a terminal:
brew install python@3.11
git clone https://github.com/prusa3d/Prusa-Firmware-Buddy.git
cd Prusa-Firmware-Buddy
git checkout ffed3df   #this forces version 6.1.2
Now copy the file Fysetc_6.patch to the dir Prusa-Firmware-Buddy
patch -p1 < ./Fysetc_6.patch
python3.11 -m venv .venv
python3.11 utils/build.py --preset mini,mini-en-es,mini-en-cs,mini-en-de,mini-en-es,mini-en-fr,mini-en-it,mini-en-pl,mini-en-jp --build-type release
You can skip the preset not required by deleting them from the last command.

During the update it erases all the settings so at least take note of the Zoffset value.
After update during the self calibration test the display got completely messed, neither rebooting fixed it. I switched off, unplugged/replugged the dispaly flat on display side then it reboots and it did not happen anymore....mah....who knows....
I have to say that the printer is now completely free of noise. Just for that I recommend the update.

da3b2504-fysetc_mini_612.rar