Design relocating, Power button and USB ports to the front?
 
Notifications
Clear all

Design relocating, Power button and USB ports to the front?  

  RSS
modeler
(@modeler)
Member
Design relocating, Power button and USB ports to the front?

Before I take on the design, I'm curious if anyone has a case design change / improvement, that routes the power switch and usb to the front of the chassis near the control panel.  After correcting the centering on the Lact table legs design i find the spool fills the right side nicely. However, it's a blind stab to reach in and add usb or power cycle. (This has become a re-issue, now that as shaper mods killed octoprint, need access to the USB frequently) 

A stylish design change that adds to or changes the buddy box. Something like an add on cable jacket, (cable manager) to the front of the machine and shielded mounting plate for proper access to the I/O that makes the design more practical.

Posted : 25/01/2024 6:08 pm
FoxRun3D
(@foxrun3d)
Famed Member
RE: Design relocating, Power button and USB ports to the front?

The one I made for my Minis: 

https://www.printables.com/model/67778

Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...

Posted : 25/01/2024 8:39 pm
Share: