Notifications
Clear all

Beagle camera V2 and MK4  

Page 5 / 6
  RSS
fernandotg81
(@fernandotg81)
Eminent Member
RE: Beagle camera V2 and MK4

Hello,I have a MK4 and my question is because it only shows the data if the object is sent to print from the Beagleprint app, if you start printing from the printer itself, prusalink or prusaconnect does not show data in beagleprint.

Posted : 18/01/2024 7:38 am
elchicha
(@elchicha)
Member
RE: Beagle camera V2 and MK4

The new firmware version 5.1.3 also does not work with the Beagle v2, it gives the same blue screen problem. The comments made by mintion are not correct. Beagle V2 is a brick

Posted : 25/01/2024 10:20 am
elchicha
(@elchicha)
Member
RE: Beagle camera V2 and MK4

 

Posted by: @elchicha

The new firmware version 5.1.3 also does not work with the Beagle v2, it gives the same blue screen problem. The comments made by mintion are not correct. Beagle V2 is a brick

Hi @Fengyulee, do you have any information about the problem?

Posted : 25/01/2024 2:40 pm
Zappes
(@zappes)
Reputable Member
RE: Beagle camera V2 and MK4

This is a problem with the Prusa firmware and NOT Mintion's fault. The issue will be fixed in the upcoming firmware 5.2 as I was told by somebody in the firmware team.

My models on Printables
Posted : 26/01/2024 8:24 am
fernandotg81
(@fernandotg81)
Eminent Member
RE: Beagle camera V2 and MK4

The problem of only seeing the print data if the files are sent from the beagleprint app is something that Mintion has to do with.

The one with the blue screen is from Prusa.

Posted : 26/01/2024 11:32 am
lonelymonk
(@lonelymonk)
Eminent Member
RE: Beagle camera V2 and MK4

Just got my Mk4  yesterday.  I am seeing the same problem with my V1 Beagle....  Following this post 😉

Posted : 07/02/2024 1:33 pm
fernandotg81
(@fernandotg81)
Eminent Member
RE: Beagle camera V2 and MK4

Hello,

Has anyone gotten any information from Mintion about the problem that the data can only be seen if you launch the stls from their app?

I have sent emails but have not received a response.

And regarding the blue screen problem, do you know when Prusa will release the update?

Posted : 26/02/2024 7:51 am
bkerler
(@bkerler)
Eminent Member
RE: Beagle camera V2 and MK4

It is already part of 5.2, however the official binaries for the MK4 haven't been released yet.

Posted : 26/02/2024 9:06 am
fernandotg81
(@fernandotg81)
Eminent Member
RE: Beagle camera V2 and MK4

OK thanks.

On the other issue of showing the data when the gcode is not launched from the app, it is part of Mintion, right?

Posted : 26/02/2024 10:31 am
Eslinger76
(@eslinger76)
Member
RE: Beagle camera V2 and MK4

I'm sincerely grateful for the information you shared. Your guidance has made a significant difference in my understanding.

Posted : 26/02/2024 11:09 am
bkerler
(@bkerler)
Eminent Member
RE: Beagle camera V2 and MK4

 

Posted by: @fernandotg81

OK thanks.

On the other issue of showing the data when the gcode is not launched from the app, it is part of Mintion, right?

There will be some fixes for octoprint that might affect beaglecam as well, but I'm not sure about that specific problem and if mintion has to fix it.

Posted : 26/02/2024 6:26 pm
Fengyulee
(@fengyulee)
Active Member
RE: Beagle camera V2 and MK4

Hi, if you print directly through the printer (without uploading the gcode file to the camera for printing), the app cannot display the print data. In addition, regarding the blue screen issue, we are currently waiting for a reply from Prusa.

Posted : 29/02/2024 7:22 am
fernandotg81
(@fernandotg81)
Eminent Member
RE: Beagle camera V2 and MK4

Hello,

And are we looking to solve it so that the data can be seen in the app when it is launched from the printer by mintion?

Posted by: @fengyulee

Hi, if you print directly through the printer (without uploading the gcode file to the camera for printing), the app cannot display the print data. In addition, regarding the blue screen issue, we are currently waiting for a reply from Prusa.

 

Posted : 29/02/2024 11:41 am
Christopher72
(@christopher72)
Eminent Member
RE: Beagle camera V2 and MK4

So if I just want an easy to setup camera (out of the box) for the Mk4 and PrusaConnect... this is the current best option (regardless of price)?

Posted : 02/03/2024 4:18 pm
Zappes
(@zappes)
Reputable Member
RE: Beagle camera V2 and MK4
Posted by: @christopher72

So if I just want an easy to setup camera (out of the box) for the Mk4 and PrusaConnect... this is the current best option (regardless of price)?

As of now, there is no way to integrate the camera into Prusa Connect, so no.

My models on Printables
Posted : 02/03/2024 4:34 pm
Christopher72
(@christopher72)
Eminent Member
RE: Beagle camera V2 and MK4

Thanks @zappes, 

Is there another solution for the Mk4 + PrusaConnect that doesn't involve old cell phones and buying a Pi kit?   Seems awfully big design gap when Bambulabs includes one.

Posted by: @zappes
Posted by: @christopher72

So if I just want an easy to setup camera (out of the box) for the Mk4 and PrusaConnect... this is the current best option (regardless of price)?

As of now, there is no way to integrate the camera into Prusa Connect, so no.

 

Posted : 02/03/2024 6:35 pm
Zappes
(@zappes)
Reputable Member
RE: Beagle camera V2 and MK4

There's no solution that I personally find useful. I solved the problem by mounting a standard webcam in the enclosure and streaming long prints to my Twitch channel. The quality of the video stream is great and I actually got some subscribers who religiously watch that stuff andf ping me when something is wrong. 😀

My models on Printables
Posted : 03/03/2024 12:01 pm
_KaszpiR_ liked
fernandotg81
(@fernandotg81)
Eminent Member
RE: Beagle camera V2 and MK4

Is there anything new with both the blue screen issue and the beagle app showing the print data when the gcode file from beagleprint is not added?

Posted : 24/03/2024 12:42 pm
midnight
(@midnight)
New Member
RE: Beagle camera V2 and MK4

Testing with the new 6.0.0-RC1 MK4 firmware... 1hr and no BSOD yet!  Lots more to play with before I say it's good...

Posted : 29/03/2024 7:06 pm
fernandotg81
(@fernandotg81)
Eminent Member
RE: Beagle camera V2 and MK4

Has anyone gotten a response from Mintion on the issue of data being output when printing is started from outside of their own application?

Posted : 31/03/2024 2:28 pm
Page 5 / 6
Share: