Thickening when printing in vase mode
Sorry for my English, I'm from Russia, and I translate using an online translator.
The problem is that when printing in the vase mode, after the bottom is filled, a protrusion is created on the first layers of the print in a spiral.
I attach a photo of the test cubes. White - SBS, black - PLA.
RE: Thickening when printing in vase mode
It is also interesting to find out why when printing in the vase mode, there is still a seam. I've tried different models of vases and still have a noticeable seam.
RE: Thickening when printing in vase mode
Solved
use 
and 
persents
RE: Thickening when printing in vase mode
Hi Hurin, I have the same "seam" problem with most of my vase mode models and could not fix it since now, only on a few models by rotaiting them so the seam gets hidden in the model struktur but is still there.
Could you please show the solution and changes you made with bigger pictures of your settings (whole side of Prusa slicer) in english language please.
With best regards
Kord
RE: Thickening when printing in vase mode
I chose relative extrusion and all the problems went away. Also the seam doesn't bother me anymore. Maybe the problems with the seam have been eliminated by themselves