PrusaSlicer 2.9.2 Noob has questions
New to prusaslicer.
My last slicer had preset configs for normal - fast - fine print. I do not see anything similiar in Prusa.
My prints look somewhat linear - stringy.
How can I smooth it out?
What are the prefered printing speeds for PETG. Seem what i used to print in 35 mins takes and hour now.
All help appreciated
RE: PrusaSlicer 2.9.2 Noob has questions
Really depends on the kind of PETG, I prefer to use Hatchbox PETG, and it does pretty well for 30-40mm/s for perimeters and no faster than 60 mm/s for infill at a nozzle temp of 235-240 and a bed temp of 70-80. Try using the Generic PETG, Prusa PETG, or Prusament PETG profiles and then slowing it down for a test print, as it prints increase the speed in 25% intervals and see how it affects your print!
preset configs for normal - fast - fine print.
These roughly equate to the DRAFT, SPEED, QUALITY, DETAIL presets.
Stringy prints suggest damp filament, look up threads here about drying.
Cheerio,