Profiles for FLsun qq-s and Tevo Nereus
Hi all.
I wonder if anyone have good working profiles for FLSUN QQ-S (stock( and Tevo Nereus (stock hardware + glassbed)
For now i'm using PLA at 200c/60c that works pretty good.
At the moment i seems to get more ringing when sliced in PS2.1.0 vs Cura 4.4
I have managed to get retraction dialed in (both to 6.8mm at 40mm/s)
I am not getting sharp corners on the QQ-s even at "slower" speeds about 50-60mm/s (That is, i see no real difference between 50 and 70mm/s).
First layer is real good.
The two main differences i noticed is that PS have OMG CRAZY speeds for infill and travels, along with jerk i tried setting down but i dont know what good values are.
The Nereus was easier to get fair prints with, the delta is new to me.
Any help is appriceated.
Prusa Mini+ kit. BondTech extruder. FW 5.1.2
Prusa MK3S+ kit. Stock. FW 3.11.0
Prusa MK3S+, used. Stock. FW 3.13.3