Notifications
Clear all
Printbed is cooling down after the first printed layers
Dear friends of PrusaSlicer,
Today i made an update of PrusaSlicer and since that time my printbed is switched off after printing one of the first layers. But i do not want do have that behaviour. The print bed should be turned on for the whole print.
In my opinion my PrusaSlicer configuration is correct. I configured 75°C for the first layer and 70°C for the other layers.
It would be awesome if you could have a look into my attached config - maybe you find the problem!
Many thanks in advance!
Cheers, Bertl
Posted : 22/05/2021 7:55 pm
RE: Printbed is cooling down after the first printed layers
No attachment.
--------------------
Chuck H
3D Printer Review Blog
Posted : 23/05/2021 12:15 am
Topic starter
answered:
RE: Printbed is cooling down after the first printed layers
I solved the issue now.
The reason was the activated "Economy mode" of my Ender 5 Plus printer which can be activated at the control unit.
Posted : 24/05/2021 10:59 am