Notifications
Clear all
Latest Prusa Slicer code not cooling down the hotbed
I've researched this a lot and have found no solution. After a print completes on my FLSUN V400, the hotbed stays hot. THe nozzle cools back down but not the bed. I have the correct end code in the Prusa Slicer :
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
But the bed still stays hot at 60 C. I'm using Prusa Slicer version 2.60. Thank you for any assistance.
Posted : 22/05/2023 11:43 pm