export detailed printing info by CLI - PrusaSlicer

RE: export detailed printing info by CLI

_KaszpiR_ — Sat, 08 Feb 2025 15:52:58 +0000

You could ask for a feature request in PrusaSlicer github repo to have that data available as a placeholders or added to the commented section at the end of the gcode.

RE: export detailed printing info by CLI

ng333 — Fri, 07 Feb 2025 09:04:46 +0000

Yep, that was my request. I would have liked to get the already calculated values, instead of recalculate them myself from the gcode. But thanks anyway, that was useful information.

RE:

_KaszpiR_ — Thu, 06 Feb 2025 23:09:40 +0000

You want to extract data from the generate gcode preview legend window?
AFAIR this is not available in summarized format, you'd have to somehow process G0/G1 commands yourself with additional comments to detect if the perimeter or infill is generated.

What could be useful is https://help.prusa3d.com/article/list-of-placeholders_205643

export detailed printing info by CLI

ng333 — Thu, 06 Feb 2025 09:13:31 +0000

Hello,

after slicing, some beautiful and useful information are calculated (/estimated), i.e. time and percentage of support material, solid infill, etc... I refer to whater is in the yellow circled box of my screenshot.

I'd like to extract all those values from command lines, is it possible?

All I can find is to export the gcode by the command "--export-gcode" , but the gdoce file only contains the summarized info in the green circle of the screenshot, such as estimated printing time, and filament used.

thank you.

(the screenshot gets cutted, i added the two zoom in part)